- Temperature probe sensors
- Bare Metal Temperature Probe Cable length: 10 ft Range: -40°C to +55°C (-40°F to +131°F) Accuracy: -40°C to -30°C = +/- 2°C -30°C to -10°C = +/- 1°C -10°C to +55°C = +/- 0.5°C
- Glycol-Encased Temperature Probe Cable length: 10 ft Range: -40°C to +55°C (-40°F to +131°F) Accuracy: -40°C to -30°C = +/- 2°C -30°C to -10°C = +/- 1°C -10°C to +55°C = +/- 0.5°C
- Wireless Capabilities
- Bluetooth low energy: Compatible with MV smart cameras and MR access points
- Operating frequency: 2.400–2.4835 GHz
- IEEE standard: 802.15.1 (Bluetooth 4.2 Low Energy BLE)
- Data Logging
- Data sampling: Sample polling every two minutes; data reporting to gateway every 20 minutes, or immediately upon threshold violation
- Onboard data storage: 4,000 data points (5 days of data at the default sampling rate)
- Bluetooth Low Energy (BLE) messages encrypted and authenticated using Cisco Trust Anchor technology
- Power
- Two AA batteries or power adapter
- Battery life up to five (5) years
- Power ratings: 5V; 0.1A
- MT11 Operating environment
- Temperature: -18°C to +55°C (0°F to +131°F)
- Relative humidity: 0-95%
- Physical Characteristics
- Dimensions 117.1mm X 65.9mm x 26.0mm (length x width x height)
- Battery compartment
- Multicolor, multifunction status LED
- General purpose button
- Reset button
- USB-C Port
- Sensor detection plug (receptacle connector)
- Warranty
- Three-year hardware warranty with advanced replacement
- Ordering information
- MT11-HW: Meraki MT11 Temperature Probe Sensor
- MA-CBL-TEMP-ME-1: Bare Metal Temperature Probe
- MA-CBL-TEMP-GL-1: Glycol-Encased Temperature Probe
- LIC-MT-XY: Meraki MT Enterprise License and Support (X = 1, 3, 5, 7 years)
- MA-PWR-USB-XX: External Power Adapter (XX= US, EU, UK, or AU)
- In the Box
- MT11-HW
- Quick-start and installation guide
- 2x AA batteries
- Mounting equipment:
- Wall mount backplate
- Magnet
- VHB tape
- 2x drywall anchors
- 2x mounting screws
- 8x cable clips (included with sensor probe)
- Mounting gasket (included with sensor probe)
- Note: Each Meraki MT sensor requires a license to operate. MA-CBL-TEMP-ME-1 and MA-CBL-TEMP-GL-1 are sold separately but at least one is required for operation.
Não há comentários ainda.